Use the left and right arrow keys to select different speakers connected to the system, then use the up and down arrow keys to adjust volume levels for each set of speakers.
Now turn your amplifier back on making sure that it is connected to your CXN (V2) via either the analogue RCA or XLR sockets. 2560 It's so low that I have to turn the receiver volume up all the way (max level), and even then it's still too low - and nowhere near as loud 15 มี. By staying below -6dB below that max setting you can typically avoid over-driving the receiver, which could potentially damage your speakers and receiver. Instead, try these troubleshooting tips to get your brand new sound system up 24 ก.
A blue-ray was selected (a decent CD would also serve the purpose well) because the audio is less compressed (or not compressed at all) verses audio coming from satellite or cable. You'll know the switch is on when it is green. With the Comcast cable box connected to the Denon AVR-x2300w I have to crank up the volume to practically half way just to get any sound, with the AVR-x1300w going directly to the TV the sound got louder at a much lower volume I recently upgraded to an ATI 5670, and a Denon AVR-391 so I can use HDMI for audio and video now, and I still have the same problem! My receiver needs to be around -26 for the same volume level my Xbox puts out -45. and my volume range is usually -40 to -45. 2561 Make sure to turn on your receiver and all input devices.